How To Make A Razor Electric Scooter Faster?

Razor Electric Scooters are the best on the market. It is a hot favorite among young adults and kids.

This scooter is known for its low maintenance costs. If you follow some simple road safety rules and keep a close watch on wear and tear, the ride will give you joy for years to come.

With simple care, you can avoid its speed, reducing overtime. With timely maintenance, you can also increase the speed of a Razor electric scooter.

Most electric scooters have mechanisms installed in them that restrict their speed as per state laws.

Other reasons for low speed can be a small battery, tires with irregular pressure, and a worn-out chaining system.

How Do I Increase The Speed Of My Razor?

Electric scooters operate on a specified speed range, set according to the country or state laws.

For instance, in America, the maximum speed for an electric scooter ranges from 15 miles per hour to 25 miles per hour, depending on the state. So legally, you should not drive above this speed limit.

But let’s say you want to increase it in theory (wink wink, nudge nudge!). How would you do it?

Remove the Speed Limiter

A speed limiter immediately cuts off the motor’s power supply as soon as you tech the maximum set limit.

While it varies a lot, the most straightforward answer to increasing your scooter speed is to take out the limiter.

Some models will allow you to disable the limiter directly from the display. If not, you will have to find the limiter wires connected to the motor and disconnect them.

Do be cautious doing this, and follow manufacturer instructions.

Change the batteries

While it varies from model to model, getting more powerful batteries will juice up your scooter easily. The Razor E100 uses two 12V batteries, for example. You can change the batteries and put in two 24V ones to get a total of 48V. However, take note of the next point before you do this.

Change the Motor

Increasing battery power is meaningless without a better quality motor. For example, the E100 uses a 100W motor, which won’t extract much juice from two 24V batteries.

You can amp up the scooter with a 1000W motor, which will give you great speed and still last you for quite some time.

How Do I Make My Dead Razor Come Back To Life?

Sometimes, it isn’t about increasing speed as much as wanting to get back to what the scooter used to be like when you bought it. Electric scooters are susceptible to wear and tear, and their speed goes down after a while. The easiest way to improve speed on a dead scooter is to follow these simple maintenance steps:

Check Tire Pressure

The first step in our list is to check the air pressure in the front tire. There is a high chance that even a new tire may have less air pressure. Air pressure in the tire plays an essential role in determining the speed of the scooter.

If you wish to achieve the top speed and want to make the scooter go faster, you must maintain its front tire pressure. If the pressure is low, use an air pump to inflate the tire; otherwise, you can use a valve to release the pressure if it is high.

Replace Brake Pads

The second step involves checking up on the brake pads on the tires, and these brake pads are present on either side of the tires. These pads must adequately align with the tires.

If they are not aligned, then there is a high chance that you may experience scraping of the tire with the pads while riding.

This scraping will affect the speed and would not allow you to go faster. This scraping is also not good for the durability of the brake pads.

To align these brake pads properly, you have to unscrew the nuts on these pads and align them directly with the tire. After they are aligned, you can again tighten the screw.

Lubricate The Chain

The third step is to remove the screws which tighten the chain guard, and the chain guard is present at the right-hand side of the E110 Razor electric scooter near the rear wheel. You can apply a chain lubricant on the chair.

A chain lubricant reduces the friction present between the chain and enables them to rotate smoothly faster. Similarly, when there is less lubricant present on these chairs, the vehicle’s speed slows down as there is an increase in friction.

Now reinstall the chain guard and tighten the screws, now you have a smoothly operating chain system.

Don’t Roughhouse It.

Driving on a smooth surface also helps you to increase the speed of the scooter. Electric vehicles operate on flat and smooth surfaces such as roads, concrete, tiles, wooden flooring, etc.

These scooters can’t perform at their highest level when running on irregular surfaces such as mud, gravel, grass, and so on. These types of uneven surfaces are not suitable for the longevity of the electric scooter as well.

The kind of terrain you drive your electric vehicle on massively impacts the speed of the car.

Keep It Light

The fifth step is to keep the electric scooter light, the E110 Razor electric scooter has a weight capacity of about 120 pounds, and it is recommended that only one person ride it at a single time.

Exceeding the weight limit adds an extra burden to the scooter, which then, in turn, affects its speed. It would help to keep your weight and the scooter’s weight along its center.

This allows you to maintain the right balance. Adding weight on either side of the scooter may cause the scooter to lose balance.

Scooter slips due to weight misbalance are significant causes of minor accidents involving an electric scooter.

Keep It Charged

The sixth step is to use the electric scooter when it is fully charged. The amount of charge in the battery plays an essential role in supplying the power to the scooter.

An electric scooter with less battery will not perform at a similar level to an electric scooter with a full charge. An electric scooter with a full charge on its battery easily stains it’s top speed and can move faster.

Frequently Asked Questions

How fast do Razor electric scooters go?

Razor electric scooters are high quality and premium electric scooters. These scooters have a top speed of 18 miles per hour, although the speed depends on various factors such as the model, battery type, battery size, power in the motor, and so on.

You may not find this speed very fast, but in comparison to electric vehicles, especially scooters, it is excellent. There are a variety of different models available in Razor electric scooters.
Each of these models has some different specifications from one and another. You can choose the electric scooter with the best specifications that suit you.

Which is the fastest electric scooter?

Currently, the fastest electric scooter available in the market is Dualtron X. This scooter has an awe-inspiring top speed of 55 miles per hour. It supplies the users with more than 6000 watts of motor Power with a single tap.

It is one of the most extreme electric scooters available, although it is not very practical as a lot of places have a speed limit of 15 or 25 miles per hour on electric scooters.

There is no limit on speed on private land and property in America so that you can enjoy the full potential of this electric scooter only on personal property.


The Razor series of Electric scooters are the best selling models for all ages. Making the best better is tough, but the simple steps and tips given in this article can help you along the way.

If you are looking to make a new scooter go faster, try to enhance the battery and motor power. Another way is just to cut out the speed limiter.

If you are trying to bring a dead razor back to life, there are many simple maintenance tips that you can follow which will make your razor go back to its glory days. Keep a check on the tire pressure, replace the brake pads, oil the chain, remove any extra weight, use it for smoother terrains, and keep it charged. You will see a difference in just a few days.

Written by Lee Hill

Electric Scooters That Go 20 MPH

Electric Scooters That Go 20 MPH – Are They Legal?

New York City

Why Are Electric Bikes Illegal In NYC?